Re: stereo system
Thanks to TWO GUNS</P>
<P mce_keep="true"></P>
To keep from cutting the OEM connector wires off , this is your answer, done some research, and this is what I came up with >>>>>> Think it's less than $3.00</P>
Also, found on this forum a color code :</P>
Black---------------------------Ground
Red with white stripe------Always hot
Green with white stripe---Hot in accessory position
Yellow-------------------------Left speaker
Yellow with red stripe-----Left speaker
Blue----------------------------Right speaker
Blue with white stripe-----Right speaker </P>
The RTV 1100 wire harness is wired for the radio, </P>
Speakers are already installed >>>></P>
Note: I wired the radio direct to the hot wire, not to the accessory position !That way, when the engine was turned off, and I still wanted to listen to the radio, I wouldn't be running the HOURS up on the machine and it not running >>> Remember, if you turn that key on the accessory position, the hours will be a clicking on, running the hour meter up !!!!</P>
<FONT color=#000000>http://www.allelectronics.com/cgi-bin/item/CON-90/search/9_PIN_CONNECTOR_.html</FONT></P>