X1100 Work light wiring?

Nevadablue

Nevadablue

Member
I have my lights. The wiring comes out in the normal location on the roof. The fuses and relays all seem to be in place. So, when I reach into the radio hole in the headliner, I can find a cable with a square plug on it. I'm not sure what to do with this thing. I have separate switches for front and rear lights that fit nicely into the switch panel.
Does anyone here have pictures of their rig with the headliner out? I know I'll have to remove it to do this project, but I would rather see what's up there before I remove the liner. The cable doesn't seem to have the same color code as the wires coming out of the roof. I also want to add some wiring for a second rear light while I have the liner out anyway. I am using LED lights, so the total wattage will be within the capacity of the wiring and relays and fuses.
 
T

Toolman77

Guest
Ken, you should not need to remove the head liner, the switch wires are taped up with the square plug for the radio hook up, just us tape and separate. There are two sets of three wires each, one set is for the front work lights and one set for the rear work light. I believe the reason for the three wires is because it is a lighted switch. Then there is one or maybe two more sets of two wires each, one set is for the rear strobe light, I am not sure about the other. I will see if I can find the directions from when I hooked mine up and send you a copy. I will make sure they do not have a copy right, lol.
 
You must log in or register to reply here.
Top