I purchased a used 2017 Kubota RTV x1100c with about 300 hours. I changed all fluids and filters using the Kubota Hydraulic Fluid. It ran fine for about a year. Then, as I was heading home the trans was slipping. After parking it, I checked all fluid levels. When I tried to engage the transmission it now makes a noise and vibrates. There are no leaks and am hoping this is a minor fix since the transmission has so few hours.
RTVx1100c Transmission Issue
- Thread starter walove
- Start date
Very strange. I've not heard of one doing this before. Especially one that is barely broken in.
I'm not coming up with anything now other than putting in fresh Super UDT fluid, but since that is what you used that seems pointless. Will search a bit and let you know if I find something.
I'm not coming up with anything now other than putting in fresh Super UDT fluid, but since that is what you used that seems pointless. Will search a bit and let you know if I find something.
Would this happen to be the model that has the fill port in an odd place that so many owners had trouble with ? The one I remember reading about "appeared " to be a fill port for the transmission but wasn't. So those members had no fluid in the trans after using the wrong fill port.. Not saying this is that model but I would check the manual to make sure.
Armyaviatr
Active member
Collie is correct, the main reservoir is under the passenger seat. Also make sure the suction screen is clean.
aurthuritis
Well-known member
could this be another machine with low hours but had 5 years on the oil? have the pressure checked??? vibration could be a bad injector in the engine and would also cause power loss. start the engine and crack each injector line at the injector one at a time and re tighten. if you have a down cylinder the engine rpm won't change when the bad cyl is cracked. could need valves adjusted