Here are a few pictures of recent hydraulic mods to add 3 point for rear and 3 point and snow plow for the front.
Top view of Kubota cooler, fan operated, also in picture are hydraulic relief valve, this is from the secondary port on the new auxiliary pump and goes to the front of the RTV for power forward, also visible in the picture is the Fasse electric over hydraulic valve to control dump, 3 point up and down and snow plow angle from dump handle.
Second pictures shows front of RTV with 4 valves for 3 point and snow plow, power forward and Warn Winch receiver mounted power connection, also on cab are lights that were added.
Third picture shows rear of RTV with 4 hydraulic connections for 3 point, rear winch connection and top of cab rear work light and 2 reverse lights.
Fourth picture shows top of auxiliary hydraulic pump, this is a direct replacement for the stock RTV pump, it is a longer pump with 2 out and 2 returns, first circuit is used for power steering, dump and 3 point / snow plow, 2nd circuit has the new cooler in the circuit and is used for power forward. Presently only thing I have is a hydraulic water pump I will use for pond filling from a stream, have yet to try it.
Last picture shows electrical switch for dump (Red), 3 point up (White) and snow plow angle (Blue) using the dump handle. Also visible to the rear of the Fasse switch is the RF switch for the Warn Winch.
If the suspension falls off I will still have hydraulics.
Richard
Top view of Kubota cooler, fan operated, also in picture are hydraulic relief valve, this is from the secondary port on the new auxiliary pump and goes to the front of the RTV for power forward, also visible in the picture is the Fasse electric over hydraulic valve to control dump, 3 point up and down and snow plow angle from dump handle.
Second pictures shows front of RTV with 4 valves for 3 point and snow plow, power forward and Warn Winch receiver mounted power connection, also on cab are lights that were added.
Third picture shows rear of RTV with 4 hydraulic connections for 3 point, rear winch connection and top of cab rear work light and 2 reverse lights.
Fourth picture shows top of auxiliary hydraulic pump, this is a direct replacement for the stock RTV pump, it is a longer pump with 2 out and 2 returns, first circuit is used for power steering, dump and 3 point / snow plow, 2nd circuit has the new cooler in the circuit and is used for power forward. Presently only thing I have is a hydraulic water pump I will use for pond filling from a stream, have yet to try it.
Last picture shows electrical switch for dump (Red), 3 point up (White) and snow plow angle (Blue) using the dump handle. Also visible to the rear of the Fasse switch is the RF switch for the Warn Winch.
If the suspension falls off I will still have hydraulics.
Richard
