Sorry to say guys but hard times are forcing me to sell my RTV. My real Estate busines is all but dead and momma says if i want to keep feeding deer i better sell some toys first! So here it is,,Many of you know me and my RTV,I am one of those fanatics when it comes to taking care of things. This thing has been babied since day 1 and always garaged when my butt is not in the seat. After purchasing it new i added many items, many of which can be found in the threads here as I posted pics and asked many questions along the way.</p>
As of 30mins ago this RTV has 99.7 hrs, I have serviced it 3 times and will be do for another service very soon. i have all the manuals and etc that came with the maching new along with the service records of each time i serviced it. Always Kubota synthetic hydo fluid and filters and rotella synthetic in the engine.</p>
OPTIONS:</p>
kubota glass windshield, rear plexi glass windshield. the rear has a few cracks in it since the plexiglass i used was way to thin but still works at keeping the wind off of you very well.</p>
3500lb Camo winch mounted in the factory winch location with a matchingfactory rocker switch in the dash. Wired straight to the battery, in wire loomwith circuit breakers.</p>
Wink wide angle mirror</p>
Spray in bed liner</p>
Aftermarket lights mounted on the roof with all wires sealed tight in plastic wire loom.</p>
2 storage trays under the hood</p>
matching camo Kubota Full storage cover</p>
I added a seperate fuse panel, next to the factory panel for all the Electrical accessories so nothing would interfear with the factory electrical system if there was ever a problem.</p>
I added 2-27x11x12 AT 589's on the rear and 2- 27x9x12 AT 589's tires at 33hrs. They have maybe been on pavement 1 or 2 times, still big square lugs just like new,they really dont show any wear at all.always ran on dirt and inmud. these tires significantly improved traction in the mud like you can not imagine!</p>
Tommy here on the board also made me some skid plates for the front axles that completely cover boththe front,back,bottom and rear of the front U joints,no worries here, these are very heavy duty.! Thank you Tommy!</p>
I also added adeflecter between the bed and cab to keep trash out of the alternator and engine since i was always finding corn and dirt on top of the motor and alternator. there should be a thread here on the boad of that install.</p>
the only issue i can find with my RTV is the seat has some small cracks on the outside edges. Took it to Idaho elk hunting and the temps got down near -10 and i figured our fat butts cracked the frozen seat. if this is an issue for anyonei will have the seat recovered.</p>
I hate to do this but hard times have finally caught up with me.and I must sell my baby.</p>
First $7000 gets it and i am willing to help with delivery if you are not close to east texas, just let me know.</p>
just washed it a few minutes ago and i will make sure this machine is spotless and show room cleanwhen you get it.</p>
have questions? Please do not hesitate to give me a call anytime.</p>
J.R. Simpson </p>
903-850-3324 Cell</p>
903-383-3324 Home</p>
/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01023.JPG</p>
/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01025.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01026.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01028.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01034.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01033.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01032.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01030.JPG</p>
As of 30mins ago this RTV has 99.7 hrs, I have serviced it 3 times and will be do for another service very soon. i have all the manuals and etc that came with the maching new along with the service records of each time i serviced it. Always Kubota synthetic hydo fluid and filters and rotella synthetic in the engine.</p>
OPTIONS:</p>
kubota glass windshield, rear plexi glass windshield. the rear has a few cracks in it since the plexiglass i used was way to thin but still works at keeping the wind off of you very well.</p>
3500lb Camo winch mounted in the factory winch location with a matchingfactory rocker switch in the dash. Wired straight to the battery, in wire loomwith circuit breakers.</p>
Wink wide angle mirror</p>
Spray in bed liner</p>
Aftermarket lights mounted on the roof with all wires sealed tight in plastic wire loom.</p>
2 storage trays under the hood</p>
matching camo Kubota Full storage cover</p>
I added a seperate fuse panel, next to the factory panel for all the Electrical accessories so nothing would interfear with the factory electrical system if there was ever a problem.</p>
I added 2-27x11x12 AT 589's on the rear and 2- 27x9x12 AT 589's tires at 33hrs. They have maybe been on pavement 1 or 2 times, still big square lugs just like new,they really dont show any wear at all.always ran on dirt and inmud. these tires significantly improved traction in the mud like you can not imagine!</p>
Tommy here on the board also made me some skid plates for the front axles that completely cover boththe front,back,bottom and rear of the front U joints,no worries here, these are very heavy duty.! Thank you Tommy!</p>
I also added adeflecter between the bed and cab to keep trash out of the alternator and engine since i was always finding corn and dirt on top of the motor and alternator. there should be a thread here on the boad of that install.</p>
the only issue i can find with my RTV is the seat has some small cracks on the outside edges. Took it to Idaho elk hunting and the temps got down near -10 and i figured our fat butts cracked the frozen seat. if this is an issue for anyonei will have the seat recovered.</p>
I hate to do this but hard times have finally caught up with me.and I must sell my baby.</p>
First $7000 gets it and i am willing to help with delivery if you are not close to east texas, just let me know.</p>
just washed it a few minutes ago and i will make sure this machine is spotless and show room cleanwhen you get it.</p>
have questions? Please do not hesitate to give me a call anytime.</p>
J.R. Simpson </p>
903-850-3324 Cell</p>
903-383-3324 Home</p>
/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01023.JPG</p>
/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01025.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01026.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01028.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01034.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01033.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01032.JPG/cs/cfs-file.ashx/__key/CommunityServer.Components.UserFiles/00.00.00.31.70/DSC01030.JPG</p>
