RTV1140 Hour Meter

[SilveradoBrian]

Hey Everyone. We just bought a 2013 1140CPX. The hour meter stays on all the time, but when the key is turned on, the number 8111.5 displays for about half a second, then goes back to the hours. The online manual I found says nothing about it. Anybody know what that means?

 

[aurthuritis]

probably miles driven. my x1100C displays hours with the Key On Engine Off and miles with the Key on Engine Running.

 

[SilveradoBrian]

probably miles driven.

That had occurred to me, but it only has 250 hours on it. That's an average of 31 mph, and these things only do that going downhill.

Appreciate the input!

 

[aurthuritis]

are the tires the stock 25x10-12 44mag? could be set for Klics

 

[SilveradoBrian]

Yes, it's stock rubber. It shouldn't be set to metric as it has a mph speedometer.

 

[geohorn]

Hey Everyone. We just bought a 2013 1140CPX. The hour meter stays on all the time, but when the key is turned on, the number 8111.5 displays for about half a second, then goes back to the hours. The online manual I found says nothing about it. Anybody know what that means?

What does it say when the engine is running? (It may simply be a random number appearing while it's booting-up, although mine displays all 888888s during bootup when key is first turned "ON", then reads hrs. Start engine and it reads miles)

 

[SilveradoBrian]

The meter displays hours all the time, key on or off. It's only when the key is turned on that the 8111.5 shows, and only for that half second or so.

 

[bordercollie]

Hummm. Maybe drive it a mile down the road and see if the number changes. My Roxor does the opposite. Right now it will say the # of hrs when the key is just turned and then immediately goes to miles on the screen.

 

[SilveradoBrian]

drive it a mile down the road and see if the number changes.

I've put 10 hours on it and no change. Speedometer does work.

 

[SilveradoBrian]

I found it. Gotta love the internets. This was on a Kubota customer care website. You have to log in to read all of it but there is sort of a preview without logging in. It reads as follows:

Solution: Hour Meter manufacturer states this is a new standard feature and normal operation. Once the meter recieves voltage (key on) it should quickly flash the 8111.4 or 8111.5 stating the program and software version codes.

Now I know! Thanks to all for the responses!

 

[bordercollie]

Thanks for letting us know SilveradoBrian. collie

 

[geohorn]

I found it. Gotta love the internets. This was on a Kubota customer care website. You have to log in to read all of it but there is sort of a preview without logging in. It reads as follows:

Solution: Hour Meter manufacturer states this is a new standard feature and normal operation. Once the meter recieves voltage (key on) it should quickly flash the 8111.4 or 8111.5 stating the program and software version codes.

Now I know! Thanks to all for the responses!

Post a LINK to that please!

 

[SilveradoBrian]

Link:

https://kubotacustomercare.custhelp.com/app/products/detail/p/7033

 

[aurthuritis]

Link:

https://kubotacustomercare.custhelp.com/app/products/detail/p/7033