Hey fellas. I have a Kubota RTV-X1100c that I recently purchased used. Runs and operates great but has developed a pretty extreme shake when accelerating in any drive gear. I have narrowed down the problem to be transmission or hydraulic related. I am hoping that maybe I've missed something, and someone could shed me some light, before resorting to unnecessarily replacing parts..
Here's what I know:
The engine revs great (in neutral).
The machine does not shake as excessively when lifted off the ground.
The shake is caused when the machine is under load.
Axles and driveline is straight and tight.
Oil levels are topped off.
Filters have been replaced.
I have not tested the charge pressure yet.
I have replaced the charge pump suction hose, old hose was not collapsed.
Cables are snug, adjusted to remove excess slop.
Top speed is 22 mph in the air, 18 mph on the ground
Here's what I know:
The engine revs great (in neutral).
The machine does not shake as excessively when lifted off the ground.
The shake is caused when the machine is under load.
Axles and driveline is straight and tight.
Oil levels are topped off.
Filters have been replaced.
I have not tested the charge pressure yet.
I have replaced the charge pump suction hose, old hose was not collapsed.
Cables are snug, adjusted to remove excess slop.
Top speed is 22 mph in the air, 18 mph on the ground