In need east coast rhode island

uncleDerek

uncleDerek

Active member
Please help me to get rolling,I'm in need of atleast 1 but will buy 2 or 4
Rims ,the old 5 lug pattern 12x8.5 please if your local or you ship on my dime.
Can pay whatever your preference is.
I didn't think it be hard to find stock ones.apparently it is...I don't like dealing with unfamiliar companies online.rather deal face to face or with someone here.
Thank you,
Derek
 
Armyaviatr said:
messics sells new ones for $120 and you can usually receive it in 2 days. Part number k5761-19132. https://www.messicks.com/part/K7561-19132/test

Messics is a very reputable company. I have used them for online orders and never had a problem.

​

Click to expand...
Thank you,I will go that route if I don't find a seller here.used be best as I spent all.i had practically on the rtv.didnt.know I would have to spent another 1,500$ just to get it running..
 
aurthuritis said:
i think you should start another thread titled "i need tires and wheels" that way someone who has some may respond
Click to expand...
Thank you,I will change or start a new thread.i would have gone an got other 5 on 4.5 rims but I already have brand new 12 inch tires for this. So I need 12" tires oviously.thank you both very much again though for help an input.
 
uncleDerek said:
Please help me to get rolling,I'm in need of atleast 1 but will buy 2 or 4
Rims ,the old 5 lug pattern 12x8.5 please if your local or you ship on my dime.
Can pay whatever your preference is.
I didn't think it be hard to find stock ones.apparently it is...I don't like dealing with unfamiliar companies online.rather deal face to face or with someone here.
Thank you,
Derek
Click to expand...
I have some off my RTV-X1120D I can sell you. I have stripped down the unit and selling the parts. Don’t mind shipping if I can save you some money.
 
Gotmyrtvmike said:
I have some off my RTV-X1120D I can sell you. I have stripped down the unit and selling the parts. Don’t mind shipping if I can save you some money.
Click to expand...
I broke down yesterday an bought one new.so I should be good on rims.
But I'm interested in upper radiator hose,
Possibly radiator (im not sure yet) but if your really stripping it down I could use a front frame section real easy spot to cut if yours is ok,I will add photo of area.im hoping I don't need a engine an or block.wont know until I get my freeze plugs in an head gasket I ordered.once I get it running I will know much more obviously. But small stuff like hood latch ( on the hood side) mine is a 04 so not sure on years of interchange.also I'm sure there is more stuff I just can't think of at moment lol.where are you located about?
Thank you very much for reaching out
 

Attachments

  • 20221226_114457.jpg
    20221226_114457.jpg
    1.1 MB · Views: 6
  • 20221223_122947.jpg
    20221223_122947.jpg
    1.6 MB · Views: 6
uncleDerek said:
I broke down yesterday an bought one new.so I should be good on rims.
But I'm interested in upper radiator hose,
Possibly radiator (im not sure yet) but if your really stripping it down I could use a front frame section real easy spot to cut if yours is ok,I will add photo of area.im hoping I don't need a engine an or block.wont know until I get my freeze plugs in an head gasket I ordered.once I get it running I will know much more obviously. But small stuff like hood latch ( on the hood side) mine is a 04 so not sure on years of interchange.also I'm sure there is more stuff I just can't think of at moment lol.where are you located about?
Thank you very much for reaching out
Click to expand...
I think I have all you have in your tread. Here is a picture of how far I stripped it down.
The frame is a 2014 Rtv 1120. Don’t mind cutting it up. Not sure if it would match up.
uncleDerek said:
Please help me to get rolling,I'm in need of atleast 1 but will buy 2 or 4
Rims ,the old 5 lug pattern 12x8.5 please if your local or you ship on my dime.
Can pay whatever your preference is.
I didn't think it be hard to find stock ones.apparently it is...I don't like dealing with unfamiliar companies online.rather deal face to face or with someone here.
Thank you,
Derek
Click to expand...
did you ever get you some rims?
 

Attachments

  • 805D6DF6-2D57-4322-8631-137C881D3B30.jpeg
    805D6DF6-2D57-4322-8631-137C881D3B30.jpeg
    2.7 MB · Views: 8
  • 10BCABA0-5D34-4D8C-BD03-FA877CB228A1.jpeg
    10BCABA0-5D34-4D8C-BD03-FA877CB228A1.jpeg
    3.8 MB · Views: 8
  • 1F4F0803-FAD8-4990-BBCE-17CCAB789ABE.jpeg
    1F4F0803-FAD8-4990-BBCE-17CCAB789ABE.jpeg
    6.7 MB · Views: 8
Anyone on here that could use the parts off my 2014 Rtv-x1120d I will sell to you for half of what they are on used sites. You guys have helped me out so much and I would like to help any of you out.
 
Gotmyrtvmike said:
Anyone on here that could use the parts off my 2014 Rtv-x1120d I will sell to you for half of what they are on used sites. You guys have helped me out so much and I would like to help any of you out.
Click to expand...
Wow! Its completely different than the 900.i have mine just about stripped like yours.i see on yours they still havnt addressed the problem sections for rust an rot though under the seat area.an the tubing is so thin as well.im to the point now I'm just doing my chasis over with good steel .also I made a system to spray the inside of the entire chasis an tube with a chemical.i would suggest anyone who owns one to do this to,because it will rot out from inside out.i actually posted a YouTube video of mine an how to make this an do it.an will be making more on this machine.just type in kubota rtv rust repair it by me 81deeds72 ( part 1 an 2. First part is short just me talking,but second shows everything.thank you for offering parts an help though.im just really getting worn.i just keep trying to move forward,but just keeps getting worse.now the head is the biggest issue..
 
You must log in or register to reply here.
Top