Search results

My three-year old X1100C with 6,500 miles (800 hours) developed a crease tear at about 4,000 miles (my X900 did the same thing). I tried to make a repair using Permatex Vinyl Repair Kit, but that was only marginally successful. I finally decided to try Besezx Leather Repair Tape and after a...

Thank you all for your advice and recommendations. I went to the ALLA site and they suggested three of their lamps to consider. I ended up purchasing the ALLA-880-ETI-56 W - 6000K Xenon White for $20.00/pair with free shipping. I went with the less expensive option as I have LED lamps on the...

I would love to have the blower on mine - although I love the V-plow. I am looking forward to hearing how it works for you. The dealer I was going to purchase one from said they gave up selling them as they were "problematic" and they did not want to deal with them.

It might be something to do with the registry of vehicles - a set of standards that must be met for any vehicle traveling on public roads. In my State every vehicle must meet certain requirements for what the vehicle will be used for - ie, agriculture, public transportation, commercial...

Here is something I generated so it would be convenient for me. I usually purchase two 5 gallon pails of the SUDT-2 to do the job. It takes some time to do the entire fluid change. Good Luck. Fluid and Filter Chart RTVX 1100C UP DATED: 7/2024 Fluids Location Type Quantity Frequency...

Thank you - there are just so many variations of these I wanted to be sure what I order will work well! I appreciate the help!!

There is an older thread about Beamtech’s 880 LED lamps but the link no longer works and I’ve not found a source with the same spec’s. Has anyone had recent luck sourcing a good headlamp replacement? I did try a set (can’t remember details) that worked but we’re not as good as the original...

Yes - that is the one I used. I believe I purchased it via eBay. I was going to check my records and let you know but you beat me to it! Good luck. I love it. Especially when it is snowing .

Other than installing the hardware cloth over the air intakes for HVAC and engine air I spray the wire harnesses and heater hoses, etc. with capsaicin. It works and, if under cover, lasts quite a while. I use the capsaicin spray made for spraying fence post to deter horses from chewing on...

No kit - just a beeper and a bit of wire and connectors. I used 3M Scotch Loc connectors (two port and three port) cut into the green/black switched ground from the parking brake switch and one of the pink switch "hot" wires. I mounted the beeper with velcro to the firewall behind the wire...

I did the same, but getting the debris out should help as well. Keeping that area dry and allowing for air flow should add years to the life of the bed.

I was just blowing out the tiny joint between the head wall and bottom of my RTV X1100C dump body and realized that in just two years quite a bit of material has accumulated in the rail under the joint between the head wall and the floor of the dump body. With the dump body up I blew compressed...

I have occasionally driven off with the parking brake partially engaged, and although I have realized it not too soon after, it is easy to do - especially if the brake is not pulled really tight. To help prevent this I installed a noncontinuous beeper. It does work and although a bit of an...

Try heating the socket portion to get it to expand. A MAPP torch should work.

Hello Alan, Welcome to this forum. Many regulars have great insight on RTV's and their maintenance. What type of add-ons are you considering? What have you ordered as equipment with the order from Kubota? You will certainly find your new machine to be a joy to use. Cheers-

The crank windows on my 2022 X1100C - especially the driver's side - have been difficult to crank down and especially up. Well, I finally decided to pull the panel off the door to see what the problem was. I didn't see any way to adjust the mechanism and the metal track seemed well greased. I...

I just purchased this item when I saw it was listed at $21.00. Fit well and it is from ATVWORKS.com. I went to their website and they have it listed for $39.00! I am thinking of purchasing another right away.

I had the same repair on my 2014 X900.

That is really interesting! Glad you got it working - I love the unit - especially when snowing. Not sure why the wiring in my machine is a bit different. It did take me a while to figure it out.

It's been a while since I installed mine. The schematic I included in an earlier post (#13) worked for me. I do remember have something not work properly with the way I wired it first. That is why I posted my schematic. Sorry I can't provide a clear answer for your problem. I found that the...