Search results

There are two types of hand throttles available on the X1100C - 1) the one that is standard on all machines and 2) the one you can add on that is more robust. According to the users manual and the dealers, the one that is standard is to be used for warming up the machine in cold weather. It...

One thing to keep in mind is that Kubota introduced the X-series in about 2014. There is the Kubota RTV-900 prior to 2014 and then the RTV -X900. They are slightly different in many ways. The 1100 series are the full cab model and the same thing there with the introduction of the X-1100.

Very glad you Very glad you got it working. I surely don't understand why ours are different - mine works really well - ran it for almost 6 hours straight in our last snow event. I have an extra knob I will send to you if you wish. I had to purchase a 2 pack so I have the extra.

that is exactly what I found - see my schematic on the first page.

So sorry to hear about your problem. I know I was a bit confused about the wiring and that is when I determined that on my machine I needed to change the connection to the middle terminal of the connector. I am fortunate that I caught this early in the process.

2014 X900 11,000 miles and 1,750 hours 2021 X1100C. 2,300 miles and 337 hours

There are a number of threads in which mirrors have been discussed, however this comment is a bit different so I made it a separate comment. I ordered the Kubota side mirrors when I ordered my X1100C. I took delivery in December of 2021. I do like them - but I agree the passenger side mirror...

It is OK to give into peer pressure at our age! Funny you should say that you are thinking of what to do with the other lights. Just yesterday I was looking at the one extra lamp I purchased and in a fleeting moment wondered where I can use it! Have fun!!

Sorry - meant to include it with the post: and $6.99 for two! https://www.amazon.com/gp/product/B0BN191348/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

Sorry - eye scratches are painful - but they heal up quickly - I hope that is the case for you!

I have a Boss V-XT and I found it easiest to mount the control with velcro on a piece of HDPE that I mounted to the dash as seen below. I took the handle off the control leaving just the head ("puck" as Tinsnip suggested). I did this with my X900 years ago and now with my X1100C. I like being...

The lamp arrived this afternoon so I installed it. I was able to get it in by taking the bottom section off and loosening the top as you suggested. I tried to remove the steering wheel, but it didn't want to come - I was able to take the steering wheel off my X900 with no problem, but this...

How did the installation go?

While I can do the shifting by feel, after a few hours of plowing I sometimes find that I don't always shift fully into L. A light would help so I am thinking that your idea would be a good project that doesn't cost much. I haven't yet studied how the dash board is put together so I am curious...

It is a nice unit. The stock switch will work as it is intended to work - BUT - the new unit works independently so you never have to use the stock switch. The unit works well - the more you turn it the longer the interval - I haven't used the stock switch at all now. Have fun.

"I started looking over my suction line and found cracks in the suction hose near the hose clamp at the top... I will attach a picture. I am guessing it is sucking air in and causing my problem." The integrity of the hydraulic system is crucial. You've done so much great work so far I would...

Check the connections at the solenoid and starter. Perhaps the ignition wires to the solenoid are compromised- if the key doesn't seem to get a response it may very well be the issue - solenoid is not getting the message!

I just installed this timer module and it is really neat and works well. Amazing it is so inexpensive. The factory hot lead to the dome light is really short so it is a bit of a challenge to connect in, but doable. The unit has a potentiometer for adjusting - the directions make no mention...

How did the DR Grader work for you? Given our warmish weather the winter we have had two episodes of ice on the road. Both times my DR Grader has made the difference and I have not had to use sand.

I like what you all have done with the trailers - particularly helpful if you don't have far to go to refill them! I have a 275 gallon fuel oil tank that I took out of a home and it is my designated off-road fuel tank. I have a hand pump and the tank is in a small building that has an access...