Search results

We did purchase the shop manual, but as I am not familiar enough with the system I don't want to try this nor do I believe he will. We are in the Hermann, Mo. area, does anyone know of anyone within a reasonable distance say 100 or so miles that they could refer us to.

20 ft jetboat, my guess is that it weighs somewhere in the 2000 lb area, the issue was why the 2010 model would not pull it in midrange and the 2006 model will.

Wanted to run this past you guy's and see if we can't figure out what is going on. Myself and a friend bought new worksite 900's a few month's back and he has had some issues with his which required that the tranny be replaced on it after only 5 hours. Well he has got unit back and he was...

Bleeding Brakes Great info there Lethal GTS, curious if that we should know if there are are any other items that should be changed or looked at in this process.

Moving the air Intake I got it as follows and found it at the yahoo.net store. Note the part number. Full View Precleaner For H001251 1 34.05 2.5" Tube Subtotal 34.05 Shipping 11.83...

High Rise Air Intake Thanks to all, I finally found the one in the photo. Ordered yesterday and hope to have system changed by next week.

Donaldson Pre Cleaner I have been searching for the Donaldson Pre Cleaner that you have there and the Amsoil site that I got sent to is listing there filters like 140 to over 400 US dollars. Where do I go and get the one you have there for 25 dollars.

Had mine do the same thing and found after removing the gauge that there are 2 nuts on either side of the connections, the inside nuts were loose not allowing proper connection. Tightened everything up and reinstalled all worked fine.

Thanks for the reply folks, I thought the same thing on fluid levels and checked those all seemed OK. After much research found the the check valve can be adjusted but had no idea where to look for it. I am searching now for shop manuals on these units as we now have four of these machines and...

We just had 2 new RTV900 worksite models delivered and one of the units after about 1 hour the engine braking stopped working. The unit just keeps going after letting off the gas pedal. Any ideas on where to look for the problem, i know the unit is still under warranty but it is a pain to have...